Maintain piling records with an interactive checklist—commentable and export as PDF/Excel. Log depths, spoil, refusals, tremie data, volumes, and timestamps for bored piles.
Review façade bracket design and adjustment allowances before issue using an interactive checklist that is commentable and can export as PDF/Excel, verifying loads, fixings, and tolerances before release.
Drive steel H-piles with an interactive checklist for shoes, splices, penetration, blow counts, and alignment; commentable and export as PDF/Excel for compliance.
Set up temporary drainage swales and sumps with an interactive checklist, commentable and export as PDF/Excel, verifying sizing, slopes, outfalls, and siltation.
Inspect curtain wall internal air barrier continuity at slab edge with an interactive checklist, commentable, and export as PDF/Excel for traceable transitions.
Inspect dynamic façade safety stops and fail-safe positions with an interactive checklist that is commentable and export as PDF/Excel for compliant, documented fail-safe behavior.
Inspect façade final cleaning and protective film removal using an interactive checklist, commentable and exportable as PDF/Excel for a compliant handover.
Inspect curtain wall interface with steel support framing using an interactive checklist. Commentable steps capture evidence and tolerances, then export as PDF/Excel for QR-authenticated sign-off.
Static Compression Test (CRP) interactive checklist for constant-rate testing; commentable, export as PDF/Excel, capturing the load–settlement curve and acceptance.
Low-strain integrity testing (PIT/SE) checklist for setup, signal quality, defect screening, and acceptance—interactive, commentable, and export as PDF/Excel.